After the installation of the SW1000 or SW2000, the limescale deposits in the water pipes begin to gradually dissolve and be removed.

The process takes some time, and exactly how much depends on the hardness of the water, the age and the condition of the water pipes.

You will certainly start to see the first results in a few weeks, and the optimal result is expected to be achieved in 6 weeks.

SW1000 and SW2000 are a one-time investment! They do not need to be replaced with new ones!

Water softeners SW1000 and SW2000 can be installed on all types of water pipes: metal-polymer, steel, cast iron, copper, plastic (polymer), polyethylene pipes (PE), polypropylene pipes (PP) or polybutylene pipes (PB).

The SW1000 is suitable for pipes with a diameter of 15-25 mm, while its larger version – SW2000 – is suitable for pipes with a diameter of 40-50 mm.

Due to the small size of the model, you will need a free space of only 5.4 cm along the length of the pipe.
The dimensions of the product are as follows: height – 3.4 cm, width – 5.4 cm and length – 4.3 cm.

To install the SW2000 water softener, you will need a free space of 10.6 cm along the length of the pipe.

The dimensions of the product are as follows: height – 7.2 cm, width – 10.6 cm and length – 8.6 cm.

Devices produce a natural frequency that leads to a disharmony in the internal frequency of water molecules to separate microparticles. As a result of the process, limestone in the water binds to these microparticles instead of accumulating on your appliances and pipes.

We have done a lot of research on the optimal placement of magnetic fields in order to remove limescale from the water.The results are unambiguous – the effectiveness is not in the strength of the magnets, but in the right angle and their position, which determine the effectiveness of the water softener

We used a modern and sustainable range of ceramics, which led to the development of a powerful and small device for removing limescale, which can be used in small spaces without complex intervention in the pipes.

It is recommended to install SW1000 and SW2000 at a distance of 20-30 cm from the water meter. You can do it in front of or behind the water meter, depending on the space.

You will find precise installation instructions in the accompanying manual. It happens in no more than 5 minutes, and you do not need any tools or any special skills.

SW1000 and SW2000 are waterproof and designed to work in humid rooms. Wetting them would not cause any problem

SW1000 and SW2000 are a one-time investment. They require neither costs nor maintenance.

What’s more – thanks to the saved costs for electricity, bottled water, specialized detergents and expensive repairs, your investment will pay off quickly and many times over.

The SW1000 water softener produces a frequency that causes a disharmony in the internal frequency of water molecules, so limestone binds to microparticles in the water instead of attaching to your appliances and pipes.

The limestone remains dissolved in the water. It does not settle in plumbing and appliances, so you will not notice any limescale deposits. The same goes for the SW2000.

Water softener SW1000 is suitable for pipes with a diameter of 12-38 mm.

SW2000, in turn, is suitable for pipes with a diameter of 15-60 mm.

After installing either of the two devices, the hardness of the water remains the same, as calcium is not extracted from the water.

What the SW1000 and SW2000 do is ensure that limescale deposits are significantly reduced.

With their help you will get rid of annoying accumulations in the long run, and your household appliances that work with water will be protected.

As a result, you will have a significant reduction in annual household expenses, as well as a cleaner and shiny bathroom and kitchen.